The reactor FLR 14 is designed to intensify chemical processes and more fully recover precious metals from refractory ores and concentrates, as well as sulfide and gold-silver tellurides of minerals at normal atmospheric pressure and temperature without the use of toxic reagents. It can be used for the quick extraction of precious metals from any rock including double-hardness ores, finishing finishing of the concentrate, as well as for quick assay analysis with a gold content of more than 0.1 g / ton of ore.
The reactor is a device 3 in one. Consists of units: directly from a reactor vessel for an electrochemical process with a power source and electrodes, a solution filtration unit and a solution receiving tank. In the receiving tank there is a drain pipe with a ball valve and a vacuum pipe. A diaphragm pump is used to create a vacuum and to quickly filter it.
Highest percentage extraction of gold from ores compare to other methods.
Non-hazardous , non-flammable chemical reagent - classification (000)
Leaching of noble metals takes place in less chemically aggressive conditions. Concentration and consumption of chemicals are reduced.
This is achieved due to the flow of the electrochemical process .
The possibility of stepwise leaching of metals.
Universality of technology and applicability for different types of ores and concentrates.
Simplicity of control and process control by voltage/current regulation on electrodes.
High wear resistance design, quick change and low cost of consumables.
Volume of reactor, l 14
Dimensions, LxWxH, mm 400x500x350
Weight, kg 7
The equipment is manufactured in our factories in Australia and Russia.